-40%

ESCAP SWISS GEAR MOTOR D.C. 3-24 VOLTS 8:1 RATIO-CORELESS ARMATURE PRECISION

$ 1.58

Availability: 271 in stock
  • Nominal Rated Input Voltage: 3-34 VOLTS DC
  • Brand: ESCAP
  • All returns accepted: ReturnsNotAccepted
  • MPN: 22N
  • Reversible/Non-Reversible: Reversible
  • Shaft Diameter: 2MM
  • Gear Ratio: 8:1
  • Condition: Please note that these were gently used and are very clean and have been tested at 12 V DC in both directions.
  • Model: 8:1 GEARMOTOR
  • Current Type: DC
  • Shaft Angle: Parallel

    Description

    RARE TO FIND ONE OF THESE CORELESS ARMATURE MOTORS SO CHEAP ! !
    For sale is a high precision Swiss made gear motor. This is a very high precision and extremely efficient Swiss made DC gearmotor. For clarity please note that the MAXON MOTOR AND THE FAULHABER MOTOR are not part of the sale. they are shown for size comparison only.
    This gear motor has a 2 mm shaft once the pinion gear is removed. If you need to remove this it is not difficult to do with a Dremel tool and a cut off wheel. There is a small TIG weld on the tip of the gear that needs to be ground off and then the pinion gear slides right off exposing the 2 mm shaft.
    This
    gear
    can also be
    removed in
    less than 30 seconds with a bench grinder
    .
    Please see the photographs of the coreless armature which is the heart of this motor.
    This motor features a coreless armature which is extremely efficient and very smooth and quiet running. There is no cogging effect from this style of armature and this motor will start running at very low voltages. Please note that none of the extras that are seen in the photographs are part of the sale. For clarity the sale is for one ESCAP gearmotor only. THE BRASS BRACKET WAS USED TO BENCH RUN THE MOTOR AND IS NOT PART OF THE SALE.
    If you pay before noon Eastern time this will be mailed the very same day in a first-class envelope. It will be rolled in extra bubbles for protection from damage.